Article ID Journal Published Year Pages File Type
4365768 International Biodeterioration & Biodegradation 2008 7 Pages PDF
Abstract
This paper aims to evaluate whether a thermal post-treatment can be applied to enhance the performance of oriented strandboard (OSB). Samples from 42 commercial OSBs were heat-treated at two temperature levels (190 and 220 °C) and for three heating times (12, 16, and 20 min) using a single opening hot-press. For comparison, control boards were kept untreated. These samples were exposed for eight months to outdoor weathering, and then their physical and mechanical properties were evaluated, as was their decay resistance against the brown-rot (Gloeophyllum trabeum [Persoon ex Fries] Murrill) and white-rot (Trametes versicolor [Linnaeus ex Fries] Pilat Murrill) fungi. The results indicated that the heat-treated samples maintained their mechanical properties at a much higher level after weathering than did the untreated ones. It was determined that the higher the treatment temperature, the better the residual mechanical properties. The proposed thermal treatment also slightly improved the decay resistance against the two evaluated fungi, but it was not enough to change the resistance class of the OSB.
Related Topics
Life Sciences Environmental Science Environmental Science (General)
Authors
, , , , , ,