Use of on-site bioreactors to estimate the biotransformation rate of N-ethyl perfluorooctane sulfonamidoethanol (N-EtFOSE) during activated sludge treatment

•We measured the biotransformation of N-EtFOSE, a fluorinated repellent.•We installed on-site activated sludge bioreactors at a wastewater treatment plant.•N-EtFOSAA was detected as the sole biotransformation product.•N-EtFOSE biotransformed with a rate constant of k = 2.0 and 2.4 L g−1 VSS day−1.

Accurate rates are needed for models that predict the fate of xenobiotic chemicals and impact of inhibitors at full-scale wastewater treatment plants. On-site rates for aerobic biotransformation of N-ethyl perfluorooctane sulfonamidoethanol (N-EtFOSE), a fluorinated repellent, were determined by continuously pumping mixed liquor from an aeration basin into two well-mixed acrylic bioreactors (4-L) operated in parallel. Known masses of N-EtFOSE and bromide were continuously added to the reactors. Reactor effluents were then monitored for bromide, N-EtFOSE, and metabolites of N-EtFOSE. Of the six transformation products reported in batch studies, only N-ethyl perfluorooctane sulfonamido acetate (N-EtFOSAA) was detected in the effluents. Bromide addition to the reactors enabled rate estimates despite variations in flow rate. Pseudo-second order rate coefficients for the N-EtFOSE biotransformation to N-EtFOSAA, predicted using a dynamic model of the reactor system, were k = 2.0 and 2.4 L g−1 VSS d−1 for the two reactors, which are slower than the rates previously obtained using batch reactors. Given the relatively slow rate of N-EtFOSE transformation, its sorption and volatilization may be important in wastewater processes. The methodology used in this study should be suitable for similar on-site rate assessments with other contaminants or inhibitors.