| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 4436285 | Applied Geochemistry | 2012 | 12 Pages |
A hydrogeochemical model is presented and applied to quantitatively elucidate interdependent reactions among minerals and formation water–seawater mixtures at elevated levels of CO2 partial pressure. These hydrogeochemical reactions (including scale formation) occur within reservoir aquifers and wells and are driven by seawater injection. The model relies on chemical equilibrium thermodynamics and reproduces the compositional development of the produced water (formation water–seawater mixtures) of the Miller field, UK North Sea. This composition of the produced water deviates from its calculated composition, which could result solely from mixing of both the end members (formation water and seawater). This indicates the effect of hydrogeochemical reactions leading to the formation and/or the dissolution of mineral phases.A fairly good match between the modelled and measured chemical composition of produced water indicates that hydrogeochemical interactions achieve near-equilibrium conditions within the residence time of formation water–seawater mixtures at reservoir conditions. Hence the model enables identification of minerals (including scale minerals), to quantitatively reproduce and to predict their dissolution and/or formation. The modelling results indicate that admixing of seawater into formation water triggers the precipitation of Sr–Barite solid solution, CaSO4 phases and dolomite. In contrast, calcite and microcrystalline quartz are dissolved along the seawater flow path from the injection well towards the production well. Depending on the fraction of seawater admixed, interdependent reactions induce profound modifications to the aquifer mineral phase assemblage. At low levels of seawater admixture, Ba–Sr sulfate solid solution is precipitated and coupled to concurrent dissolution of calcite and microcrystalline quartz. Massive dissolution of calcite and the formation of CaSO4 phases and dolomite are triggered by intense seawater admixture. Hydrogeochemical modelling to reproduce observed compositional trends, resulting from an increase of the seawater fraction, can help (1) to explain changing production properties and (2) to predict the type and the degree of scaling depending on the content of injected seawater.
► Hydrogeochemical modelling of fluid–rock interactions driven by seawater injection. ► Reproduces measured compositional trends of produced oil field water. ► Indicates that fluid–rock interactions achieve near-equilibrium conditions. ► Identifies scale-minerals and quantifies their conversion in water legs and wells. ► Reveals a dependence of mineral conversion on the content of injected seawater.
