Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4439803 | Atmospheric Environment | 2011 | 7 Pages |
Long-term exposure to increased levels of reactive nitrogen compounds (RNCs) and particulate matter (PM) affect human health. Many cities are currently not able to fulfill European air quality standards for these critical pollutants. Meanwhile, promising new abatement technologies such as diesel particle filters (DPFs) and selective catalytic reduction (SCR) catalysts are developed to reduce PM and RNC emissions. Herein, effects of a urea-based SCR system on RNC emissions are discussed and we quantified the highly reactive intermediates isocyanic acid (HNCO) and ammonia (NH3), both potential secondary pollutants of the urea-based SCR chemistry. A diesel engine (3.0 L, 100 kW), operated in the ISO 8178/4 C1, cycle was used as test platform. A V2O5-based SCR catalyst was either applied as such or down-stream of a high oxidation potential-DPF (hox-DPF). With active SCR, nitric oxide (NO) and nitrogen dioxide (NO2) conversion efficiencies of 0.86–0.94 and 0.86–0.99 were obtained. On the other hand, mean HNCO and NH3 emissions increased to 240–280 and 1800–1900 mg h−1. On a molar basis, HNCO accounted for 0.8–1.4% and NH3 for 14–25% of the emitted RNCs. On roads, SCR systems will partly be inactive when exhaust temperatures drop below 220 °C. The system was active only during 75% of the test cycle, and urea dosing was stopped and restarted several times. Consequently, NO conversion stopped but interestingly, NO2 was still converted. Such light-off and shutdown events are frequent in urban driving, compromising the overall deNOx efficiency. Another important effect of the SCR technology is illustrated by the NH3/NO2 ratio, which was >1 with active SCR, indicating that exhaust is basic rather than acidic after the SCR catalyst. Under these conditions, isocyanic acid is stable. The widespread use of various converter technologies already affected RNC release. Diesel oxidation catalysts (DOCs) and hox-DPFs increased NO2 emissions, three-way catalysts (TWCs) those of NH3. The investigated SCR technology substantially lowered NO and NO2 emissions, while NH3 levels were comparable to those of TWC vehicles (300–1500 mg h−1). If applied in the future, the combined DPF/SCR technology will change ambient RNC levels, PM compositions and atmospheric redox- and acid/base-chemistry in traffic-affected areas.
► Advanced PM–NOx abatement technologies for diesel engines affect RNC emissions. ► When active, urea-based SCR catalysts lower NO and NO2 emissions by ∼90%. ► Isocyanic acid and ammonia were identified as secondary pollutants of the SCR system. ► Combined deNOx/DPF systems have the potential to lower urban RNC and PM levels. ► They also change ambient air redox and acid/base chemistry in traffic-affected areas.