Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4471706 | Waste Management | 2013 | 5 Pages |
•Major components of biomass from olive trees directly affect its thermal behavior.•Two methods were compared for a faster and more cost-effective determination of the polysaccharides.•The mass-loss fraction in the combustion process was related to cellulose and hemicellulose content.•Lignin was responsible for the higher ash content of olive leaves and their low reaction rate.
The heterogeneity of biomass makes it difficult if not impossible to make sweeping generalizations concerning thermochemical treatment systems and the optimal equipment to be used in them. Chemical differences in the structural components of the biomass (cellulose, hemicellulose, and lignin) have a direct impact on its chemical reactivity. The aim of this research was to study the influence of the organic components of the raw material from olive trees (leaves, pruning residues, and wood) in the combustion behavior of this biomass, as well as to find the component responsible for the higher ash content of olive leaves. Accordingly, the study used a thermogravimetric analyzer to monitor the different states and complex transitions that occurred in the biomass as the temperature varied. The decomposition rates of the different samples were analyzed in order to establish a link between each combustion phase and the composition of the raw materials. Two methods were used to determine the hemicellulose and cellulose contents of biomass from olive trees. Significant differences among the results obtained by the different methods were observed, as well as important variations regarding the chemical composition and consequently the thermal behavior of the raw materials tested.