| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 4481238 | Water Research | 2015 | 12 Pages |
•New fouling-resistant PVDF ultrafiltration membranes for microalgae recovery were prepared.•The membranes were embedded with in situ synthesized and PEGylated polyethyleneimine particles.•The membranes showed microalgae retention of 100% with high permeate fluxes.•The membranes showed flux recovery rates ≥94% following a simulated wash with deionized water.
In this article, we report the preparation, characterization and microalgae recovery potential of a new family of fouling-resistant polyvinylidene fluoride (PVDF) ultrafiltration (UF) membranes embedded with hydrophilic and PEGylated polymeric particles. To optimize membrane performance for microalgae harvesting, we investigate the effects of three hydrophilic additives (Pluronic F-127, polyvinylpyrrolidone and polyethylene glycol) on the morphology, pore size, bulk composition, surface composition, wettability and surface charge, flux and fouling resistance of the mixed matrix PVDF membranes with in situ PEGylated polyethyleneimine (PEI) particles. Our filtration experiments show that a mixed matrix PVDF membrane with PEGylated PEI particles and Pluronic F-127 additive (PNSM-1) has an algae retention of 100% with a permeate flux of 96 L/m2/hr that is larger (by ∼50%) than that of a commercial and hydrophilic PVDF UF membrane with a molecular weight cut-off of 30 kDa using a suspension of Chlorella sp. KR-1 microalgae with 1.2–1.4 g/L of dry biomass. The algae and water flux recovery rates of our new PNSM-1 are equal to∼ 94% and 100%, respectively, following a simulated membrane wash with deionized water and two subsequent water and microalgae filtration cycles.
Graphical abstractFigure optionsDownload full-size imageDownload high-quality image (397 K)Download as PowerPoint slide
