Development of polymer-based nanosized hydrated ferric oxides (HFOs) for enhanced phosphate removal from waste effluents

Phosphate originated from industrial effluents is one of the key factors responsible for eutrophication of the receiving waterways especially in the developing countries such as China. In the current study we proposed a novel process to immobilize nanoparticulate hydrated ferric oxide (HFO) within a macroporous anion exchange resin D-201, and obtained a hybrid adsorbent (HFO-201) for enhanced phosphate removal from aqueous system. The resulting HFO-201 possesses two types of adsorption sites for phosphate removal, the ammonium groups bound to the D-201 matrix and the loaded HFO nanoparticles. The coexisting sulfate anion strongly competes for ammonium groups, which bind phosphate through electrostatic interaction. However, it does not pose any noticeable effect on phosphate adsorption by the loaded HFO nanoparticles, which is driven by the formation of the inner-sphere complexes. Batch adsorption experiments also indicated that HFO-201 exhibits a little higher capacity for phosphate than the commercially available phosphate-specific adsorbent ArsenXnp, which possesses similar structure of HFO-201 and is produced by another patented technique. Fixed-bed column tests indicate that phosphate retention by HFO-201 from the synthetic waters results in the significant decrease of P from 2 mg/L to less than 0.01 mg/L, with the treatment capacity of ∼700 bed volume (BV) per run, while that for D-201 was less than 200 BV under otherwise identical conditions. Such satisfactory performance of the hybrid adsorbent is mainly attributed to the specific affinity of HFO toward phosphate as well as the Donnan membrane effect exerted by the anion exchanger support D-201. Moreover, the exhausted HFO-201 was amenable to efficient in situ regeneration with a binary NaOH–NaCl solution for repeated use without any significant capacity loss. Similar satisfactory results were also observed by using a phosphate-containing industrial effluent as the feeding solution.