Impact of shear force on the biofilm structure and performance of a membrane biofilm reactor for tertiary hydrogen-driven denitrification of municipal wastewater

Hydrogen-driven denitrification using a hollow-fiber membrane biofilm reactor (MBfR) was evaluated for operation in tertiary wastewater treatment. Specific objectives were to evaluate the impact of different levels of shearing stress caused by mixing and nitrogen sparging on the biofilm structure and denitrification rates. Applying high shear force proved to be effective in improving denitrification rates by reducing the thickness of the biofilm. With intensive mixing a biofilm thickness of approximately 800 μm was maintained, while additional nitrogen sparging could further reduce the biofilm thickness to approximately 300 μm. The highest denitrification rates of 0.93 g N/m2 d were obtained when biofilm thickness was lower than 500 μm. Lower extracellular polymeric substances (EPS) accumulation and carbohydrates to protein ratio observed in thinner biofilms allowed for higher nitrate removal in the system. No significant sloughing of biomass or change in total and soluble COD in the final effluent was observed under steady-state conditions.