Effect of solids retention time on structure and characteristics of sludge flocs in sequencing batch reactors

The effect of solids retention time (SRT) (4–20 d) on sludge floc structure, size distribution and morphology in laboratory-scale sequencing batch reactors receiving a glucose-based synthetic wastewater was studied using image analysis in a long-term experiment over one year. Floc size distribution (>10 μm) could be characterized by a log-normal model for no bulking situations, but a bi-modal distribution of floc size was observed for modest bulking situations. In each operating cycle of the SBRs, the variation in food /microorganisms ratio (0.03–1.0) had no significant influence on floc size distribution and morphology. The results from a long-term study over one year showed that no clear relationship existed between SRT and median floc size based on frequency. However, sludge flocs at the lower SRTs (4–9 d) were much more irregular and more variable in size with time than those at higher SRTs (16 and 20 d). The level of effluent-suspended solids at lower SRTs was higher than that at higher SRTs.