Sampling the vertical particle flux in the upper water column using a large diameter free-drifting NetTrap adapted to an Indented Rotating Sphere sediment trap

Further development of the large, surface-tethered sediment trap (NetTrap) employed as part of the MedFlux program is described whereby the large collection capacity of the NetTrap is combined with an Indented Rotating Sphere/Sample Carousel (IRSC) sediment trap (IRSC-NT). This trap is capable of collecting particle flux either in a time series or settling velocity mode; settling velocity mode allows the collection of particles that fall within discrete settling velocity intervals. During short field deployments in the Mediterranean Sea the IRSC-NT configured in the settling velocity mode successfully collected unpoisoned samples for chemical and microbiological experiments. In addition to the development of the IRSC-NT, particle-settling behavior above and below the swimmer-excluding IRS valve was tested during on-deck experiments using a specially constructed water-tight trap. Chemical analyses of settling materials (published elsewhere) suggested that separation of particles by settling velocity was achieved. However, due to the motion of the ship, it was not possible to directly measure particle-settling velocities within the trap. Particle release from the IRS did not bias the apparent settling velocity spectrum. Rotation of the IRS did not engender turbulence at the surface of the sphere or within the skewed funnel below. Tests of different ball designs over the course of the MedFlux program showed that a “ridge and saddle” pattern was optimal for efficiently transferring particles under the IRS seal while still reducing swimmer entrance to the collection funnel. The large size of the IRSC-NT did not prevent it from drifting effectively with the current. Several modifications of the present design are proposed that should improve the accuracy of the settling velocity measurements.