Article ID Journal Published Year Pages File Type
46180 Applied Catalysis B: Environmental 2012 10 Pages PDF
Abstract

Performance of Co–Fe/Al2O3 catalysts with the optimum composition (Fe/Co = 0.25) was much higher than corresponding monometallic Co and Fe catalysts in the steam reforming of tar from the pyrolysis of cedar wood in terms of the catalytic activity and the suppression of coke deposition. According to the catalyst characterization, the fcc and bcc Co–Fe alloys were formed by H2 reduction on the Co–Fe/Al2O3 catalyst. In the steam reforming of toluene, the addition of H2 to the reactant gas enhanced the activity of Co–Fe/Al2O3 remarkably. Without H2 addition, bcc Co–Fe alloy particles were oxidized and this is connected to the deactivation. With H2 addition, the bcc Co–Fe alloy with an appropriate composition is maintained in metallic state and it contribute to high activity in the steam reforming of toluene.

Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideHighlights► The optimized Co–Fe/Al2O3 showed high activity and stability in tar steam reforming. ► The optimized Co–Fe/Al2O3 has high catalytic activity and stability in the toluene steam reforming with H2 addition. ► Most Co and Fe species were reduced to form fcc Co–Fe and bcc Co–Fe alloy. ► The bcc Co–Fe alloy at the suitable composition has high catalytic activity.

Related Topics
Physical Sciences and Engineering Chemical Engineering Catalysis
Authors
, , , , , , ,