| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 46572 | Applied Catalysis B: Environmental | 2011 | 10 Pages |
Effects toward electrocatalytic activity for glycerol oxidation of the modification of carbon supported Pd and Pt-based nanomaterials by bismuth were evaluated in alkaline medium. Pd/C, Pd0.9Bi0.1/C, Pt/C, Pt0.9Bi0.1/C and Pd0.45Pt0.45Bi0.1/C catalysts were synthesized by a colloidal route, and physical and electrochemical methods were used to characterize the structure and the surface of the catalysts (TEM, HRTEM, EDX, XRD, ICP-OES and XPS). It was shown that only a few amount of bismuth was deposited on the Pt and/or Pd surface, and that no alloy was formed between bismuth and the other metals. The onset potential of glycerol oxidation is ca. 0.15 V lower on Pt/C than on Pd/C. However, Pt-free Pd0.9Bi0.1/C catalyst presented the same catalytic activity than platinum catalyst. The Pt0.9Bi0.1/C led reaching a higher catalytic activity by shifting the oxidation onset potential by ca. 0.2 V toward lower potentials compared with the Pt/C catalyst. But, the replacing of half of the platinum atoms by palladium atoms in the Pd0.45Pt0.45Bi0.1/C material allowed achieving the same catalytic activity as with Pt0.9Bi0.1/C. Electrochemical experiments combined with in situ infrared spectroscopy measurements have shown that glycerol electrooxidation mechanism is independent on the catalyst, but dependent on the electrode potential. Chronoamperometry experiments combined with HPLC measurements showed that the main reaction products were glycerate, dihydroxyacetone and tartronate at low potentials, and that the increase of the electrode potential led to the formation of mesoxalate. For potential higher than 0.8 V vs RHE, the C–C bond cleavage occurred and oxalate and formiate were detected.
Graphical abstract. Polarization curves of glycerol oxidation recorded on (a) Pt/C, Pd/C, Pd0.9Bi0.1/C and (b) Pt/C, Pt0.9Bi0.1/C and Pd0.45Pt0.45Bi0.1/C (v = 10 mV s−1, N2-saturated, 0.1 M glycerol + 1.0 M NaOH electrolyte, T = 293 K).Figure optionsDownload full-size imageDownload as PowerPoint slideHighlights► Pd or Pt modification by Bi increases the catalytic activity for glycerol oxidation. ► Platinum-free Pd0.9Bi0.1/C displays same catalytic activity as Pt/C. ► Order of activity is Pd/C < Pt/C = Pd0.9Bi0.1/C < Pt0.9Bi0.1/C = Pd0.45Pt0.45Bi0.1/C. ► Glycerol adsorption at low potentials on PdBi and PdBi bismuth is non-dissociative. ► Modification by Bi does not change the glycerol oxidation mechanism; potential does.
