| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 4676051 | Cold Regions Science and Technology | 2012 | 10 Pages |
We present the results of an Antarctic spring field study of snow drift threshold measurements made using two custom drift sensors and a commercial parts-counting device. All three sensor types worked well at detecting drifting snow events, but the sensors recorded different magnitudes (particle count per unit time) of drift. Each sensor has a unique detection threshold for particle size, and responded differently to identical wind and snow conditions, although the particle counts from the different sensors are linearly related at low wind speeds. The drift threshold is defined here as the minimum friction velocity at which drifting snow was observed during more than 10% of measurements at that wind speed. The results of this multi-sensor study demonstrate that the drift threshold is lower (friction velocity of 0.2 m/s) for very small particles that are likely transported in suspension than for coarse-grained saltating particles (0.25 m/s). These friction velocities correspond to 10-meter wind speeds of 5.6 and 7.2 m/s respectively for the conditions during this experiment. The commercially available parts counter is recommended as a low-cost alternative to custom-built drift sensors for use in future field studies of drifting and blowing snow.
► We compare three sensors for measuring drifting snow. ► Sensors' characteristics influence their thresholds for drift detection. ► Fine-grained snow was found to drift at lower wind speeds than coarser snow. ► We recommend a low-cost sensor for future drifting snow measurements.
