Stress orientation evaluated from strain localisation analysis in Aigion Fault

Inside this clayey core, a clear shearing surface with marked slip lines is visible on a plane that makes a 68° angle with respect to the core axis. This failure surface was not induced by the decompression process but is indeed a slip plane as clear striation is observed at the interface. On the basis of an elasto-plastic constitutive model calibrated on triaxial tests on the clayey gouge, it is shown that shear band formation inside the clayey core is possible. The solution for the orientation of the shear band is compared to the orientation of an existing slip surface inside the clayey gouge and this result is used to deduce the orientation of the principal stresses. It is shown that as commonly observed in weak fault zones, the orientation of the principal stresses is locally almost parallel and perpendicular to the fault axis.