Impact of mechanical anisotropy and power-law rheology on single layer folding

The infinitesimal and finite stages of folding in nonlinear viscous material with a layer-parallel anisotropy were investigated using numerical and analytical methods. Anisotropy was found to have a first-order effect on growth rate and wavelength selection, and these effects are already important for anisotropy values (normal viscosity/shear viscosity) < 10. The effect of anisotropy must therefore be considered when deducing viscosity contrasts from wavelength to thickness ratios of natural folds. Growth rates of single layer folds were found to increase and subsequently decrease during progressive deformation. This is due to interference between the single layer folds and chevron folds that form in the matrix as a result of instability caused by the anisotropic material behaviour. The wavelength of the chevron folds in the matrix is determined by the wavelength of the folded single layer, which can explain the high wavelength to thickness ratios that are sometimes found in multilayer sequences. Numerical models including anisotropic material properties allow the behaviour of multilayer sequences to be investigated without the need for resolution on the scale of individual layers. This is particularly important for large-scale models of layered lithosphere.