| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 46992 | Applied Catalysis B: Environmental | 2011 | 8 Pages |
A Mn0.6Ce0.4O2 mixed oxide exhibited rather high activity and stability for ethanol oxidation. Complete conversion of ethanol to CO2 was obtained at a temperature as low as 463 K and the activity maintained for 120 h on-stream without obvious deactivation. The Mn0.6Ce0.4O2 catalyst showed higher ethanol oxidation rate and better selectivity to CO2 which was even superior to a Pt/Al2O3 catalyst. Temperature-programmed surface reaction and spectroscopic studies have revealed that ethoxy species were formed immediately upon ethanol adsorption on the catalyst at room temperature. These intermediates were further oxidized to acetate and carbonate species, and finally converted to CO2 at elevated temperatures. The effective activation of molecule oxygen over the Mn0.6Ce0.4O2 solid solution plays an essential role in determining the catalytic performance. Oxygen transfer from molecular oxygen to MnO2 active sites through CeO2 in the solid solution realized the effective activation of molecular oxygen. At lower temperatures, the oxidation of ethanol mainly produced acetaldehyde, and the direct oxidation of ethanol to CO2 became the major route at higher temperatures, depending on the activation of molecular oxygen.
Graphical abstractFigure optionsDownload full-size imageDownload as PowerPoint slideResearch highlights▶ A Mn0.6Ce0.4O2 mixed oxide is highly active and stable for ethanol oxidation. ▶ Ethanol is totally converted to CO2 at 463 K and maintains for 120 h on-stream. ▶ Solid solution enables effective activation of molecular oxygen in the feed gases. ▶ Migration of active oxygen species on the catalyst surface is of utmost importance.
