Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4769070 | Hydrometallurgy | 2016 | 6 Pages |
Abstract
A simultaneous leaching process to extract both bismuth and manganese by one-step leaching in hydrochloric acid solution is proposed in this paper. Thermodynamic investigations of the Eh-pH diagram of both Mn-H2O and Bi-S-Cl-H2O systems showed that the equilibrium potentials of MnO2/Mn2 + couple were much higher than that of Bi2S3/Bi(III) couple. The electrochemical experiments presented the electrochemical reactions of bismuthinite and pyrolusite. Most suitable operating leach parameters were established as follows: liquid-to-solid ratio (mL/g), 5:1; initial hydrochloric acid concentration, 4 mol/L; leaching temperature, 70 °C; ore ratio (measured by the mole ratio of manganese and sulfur, n(Mn)/n(S)), 1.4/1; leaching time, 2 h; and agitation speed, 500 rpm. Leaching efficiency of 96.6% and 97.1% for bismuth and manganese were obtained, respectively, under the optimum experimental conditions.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Engineering (General)
Authors
Fenghua Ding, Jing Zhan, Zhijian Wang, Liyuan Chai, Chuanfu Zhang,