Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4913849 | Construction and Building Materials | 2017 | 9 Pages |
Abstract
Rapid-repair concretes are currently used to repair structures such as bridge decks, substructure elements on bridges (e.g. piers and columns), pavements, and components of buildings. Rapid-repair concretes must not only achieve a high-early strength in a short period of time (e.g. 20Â MPa in 3Â h) but must also survive for the remaining life of the structure. One way of achieving high early-age strength is the use of ettringite-based cements; in these cements early strength is attributed to the rapid formation of ettringite by incorporating, in the binder, calcium sulfo-aluminate cement or a combination of calcium aluminate cement and calcium sulfate. Although research has proven that early-strength is achievable, there exist limited published durability data for these systems. This paper presents data on the performance of a number of rapid-repair materials placed at the high-tide level of a marine exposure site (Treat Island, Maine, USA) which experiences approximately 100 freeze-thaw cycles a year making it one of the harshest environments for concrete in the world. A number of concretes were studied including an ordinary Portland cement (PC) and a high-early strength Portland cement (HEPC) as references, PC accelerated by calcium aluminate cement (CAC) with calcium sulfate (C$), PC accelerated by calcium sulfo-aluminate (C$A(2)-PC), and calcium sulfo-aluminate belite (C$A(1)-C2S) cement on its own. Reinforced concrete specimens were monitored on a yearly basis to evaluate the corrosion condition of the steel. After three years of exposure, reinforced concrete beams from each mix were returned to the laboratory to determine chloride profiles, and to conduct X-ray diffraction (XRD) and microstructural investigation using scanning electron microscopy (SEM) coupled with energy dispersive X-ray (EDS) analysis.
Keywords
Related Topics
Physical Sciences and Engineering
Engineering
Civil and Structural Engineering
Authors
E.G. Moffatt, M.D.A. Thomas,