Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4914370 | Fuel Processing Technology | 2017 | 8 Pages |
Abstract
Effect of dispersed Mo based catalyst on residual hydrocracking was investigated in this paper. The study was performed in an industrial scale hydrocracking unit with the average reactor temperature of 399-419 °C and pressure of 18 MPa. Vacuum residue from Ural crude oil was fed to the reactor. A sediment formation model was proposed with parameters sets for the regime with classical supported Ni-Mo/Al2O3 catalyst and for that with a combined system of supported and dispersed catalyst. Four process parameters were incorporated in the model equation: reaction temperature, hydrogen partial pressure, exothermic gain and hydrogen makeup to feed mass ratio. A decrease of the sediment formation with the application of dispersed Mo catalyst was observed, which results in higher Mo concentration in the liquid phase and thus in higher hydrogenation activity and stabilization of coke precursors. Hydrodesulfurization was also investigated and a sulfur distribution model was created with parameters for both regimes. The model contains three lumps with significant sulfur content: sulfur contained in the vacuum residue, sulfur contained in the vacuum gas oil and hydrogen sulfide. Application of the catalyst and increase of reaction temperature from 399-414 °C to 414-419 °C resulted in increase of average sulfur conversion in vacuum residue from 86.5% to 87.9%.
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Chemical Engineering (General)
Authors
Eduard Manek, Juma Haydary,