Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4924777 | Journal of Wind Engineering and Industrial Aerodynamics | 2017 | 16 Pages |
Abstract
Full-scale experiments were conducted to investigate wind loading on roof tiles in hip, ridge, and perimeter locations, identified from past storms as main points of damage initiation. The objectives were to: (i) provide test-based data on wind-induced loads for tiles, and (ii) evaluate characteristics of near-surface flows to assess tile loading models. The experiments included pressure measurements on the external surface and in the cavity underneath the tiles, and wind speed measurements near tile surfaces. The highest net uplift pressure (computed as external pressure minus the cavity pressure) was observed on the gable end ridge tiles. Except for a few non-critical cases, due to effects of pressure equalization net uplift was lower than external surface uplift. Mean wind speeds at tile surfaces were recorded that were up to 55% higher than the mean wind speed at mid-roof height in the approach flow. Two alternative models that use wind speeds near the tile surface to determine net design wind loads on tiles were investigated. The results showed that the models can underestimate wind loading. However, when used with appropriate parameters, the models can produce results comparable to those obtained using ASCE's external pressure coefficients in conjunction with pressure adjustment factors.
Related Topics
Physical Sciences and Engineering
Energy
Renewable Energy, Sustainability and the Environment
Authors
Filmon Habte, Maryam Asghari Mooneghi, Thomas Baheru, Ioannis Zisis, Arindam Gan Chowdhury, Forrest Masters, Peter Irwin,