Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
4988698 | Journal of Membrane Science | 2017 | 14 Pages |
Abstract
Saturation of the selective layer through bitumen entrapment had an irreversible impact on the physical integrity of the membrane after treatment of the oily water. Treatment of the SAGD feed produced fouling characteristics typically expected in crossflow membrane filtration, and surface modifications to optimize separation of the oil droplets from the surface and pore percolation of the water phase should be effective to improve performance. Surface foulant accumulation was strongly controlled by linear defects resulting from solvent evaporation during sol-gel fabrication of the selective layer. A better understanding of the impact of such defects on fouling seems necessary. Finally, partial replacement of titania by crystalline BaSO4 suggested that other types of selective layers should be considered for a feed containing Ba.
Keywords
Related Topics
Physical Sciences and Engineering
Chemical Engineering
Filtration and Separation
Authors
Yves Thibault, Joanne Gamage McEvoy, Saviz Mortazavi, Derek Smith, Alex Doiron,