Simulation of the effect of the porous support on flux through an asymmetric oxygen transport membrane

The effect of the support at large pore diameters (>35 µm) for the 3-end mode transport process using oxygen as feed gas, was negligible. This was not the case for the 4-end mode irrespective of the feed gas, and for the 3-end mode using air as feed gas. This was attributed to the binary diffusion term in the BFM. Thin small-pored supports yield the same flux as thick large-pored supports considering a non-linear relationship between thickness and pore size. This can be used for the optimization of the support's microstructure with regards to mechanical strength and permeability.