Article ID Journal Published Year Pages File Type
4992770 Experimental Thermal and Fluid Science 2017 26 Pages PDF
Abstract
In this study, experimental and numerical analyses have been performed to investigate the mixing behavior of hot and cold fluids for a coaxial jet. Thermal mixing phenomenon is an important issue for many industrial applications, since thermal stress occurs when fluids do not mix completely. Several test cases were considered to investigate the mixing quality and frequency of temperature fluctuations. Computational study was performed using Large Eddy Simulation (LES) turbulence model, since this model is proven in this type calculations. A commercial CFD code, ANSYS-Fluent is used for numerical calculations. The study is performed for governing parameters as ratio of mass flow rate of hot (annular) jet to cold (central) jet and temperature difference between hot and cold jet. It is found that there is a good agreement between experimental and numerical studies with respect to spectral analyses. The dominant frequency of temperature fluctuation is found as 5 Hz as compatible with literature. Thermal mixing efficiency increases with increasing temperature difference between hot and cold jet. Also, thermal mixing performance getting better with enhancing flow rate of hot jet in the first half of the channel and the best mixing observed at ṁh/ṁc = 2 along second half of the channel.
Related Topics
Physical Sciences and Engineering Chemical Engineering Fluid Flow and Transfer Processes
Authors
, , , ,