Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5006096 | Materials Science in Semiconductor Processing | 2017 | 8 Pages |
Abstract
Nowadays, the demand for better light emitting diodes (LEDs) has led to a growing interest in producing Zn2SiO4 based glass ceramic phosphors using waste materials. In this research, Eu3+ doped Zn2SiO4 based glass ceramics were prepared based on a solid state method using recyclable glass wastes as silica source. The effect of sintering temperatures, ranging from 600 to 1000 °C and the influence of Eu3+ ions (x=0, 1, 2, 3, 4 and 5 wt%) on the structural, energy band gap and luminescence properties of the phosphors were investigated using XRD, FTIR spectroscopy, UV-Vis-NIR spectroscopy, Photoluminescence spectroscopy, and FESEM. XRD results showed the formation of α-Zn2SiO4 at higher sintering and poor crystallization when the dopant's concentration was increased. FTIR spectra showed that the progression of sintering temperature had sharpened the absorption bands. The band gap energies were identified by the measurement of the absorption edge. Results indicated that the absorption edges were blue shifted, thus increasing the band gap values when the powders were sintered at 1000 °C. The luminescent properties were studied by the measurement of excitation and emission spectra under 600 nm and 400 nm, respectively. It was observed that higher sintering temperatures of 900 and 1000 °C had decreased the red emission intensity, while the doping effect of Eu3+ concentration had gradually enhanced the red emission efficiency of 5D0 â7F2 transition. The morphologies from FESEM analysis showed the formation of densely packed grains with the increment of sintering temperatures.
Related Topics
Physical Sciences and Engineering
Engineering
Electrical and Electronic Engineering
Authors
Nur Alia Sheh Omar, Yap Wing Fen, Khamirul Amin Matori,