Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5007313 | Optics & Laser Technology | 2018 | 7 Pages |
Abstract
A Ni-Cr-Si-B alloy layer was produced on a type 304 stainless steel plate by laser cladding. In order to produce cladding layer with smooth surface and low dilution, influence of laser beam profile on cladding layer was investigated. A laser beam with a constant spatial intensity at the focus spot was used to suppress droplet formation during the cladding layer formation. This line spot, formed with a focussing unit designed by our group, suppressed droplet generation. The layer formed using this line spot with a constant spatial intensity had a much smoother surface compared to a layer formed using a line spot with a Gaussian-like beam. In addition, the dilution of the former layer was much smaller. These results indicated that a line spot with a constant spatial intensity was more effective in producing a cladding layer with smooth surface and low dilution because it suppressed droplet generation.
Related Topics
Physical Sciences and Engineering
Engineering
Electrical and Electronic Engineering
Authors
Daichi Tanigawa, Yoshinori Funada, Nobuyuki Abe, Masahiro Tsukamoto, Yoshihiko Hayashi, Hiroyuki Yamazaki, Yoshihiro Tatsumi, Mikio Yoneyama,