Optimization of hydrothermal pretreatment for co-utilization C-5 and C-6 sugars of cassava alcohol residue

Hydrothermal reaction was first applied to pretreat cassava alcohol residue for realizing the co-utilization of xylose and glucose to assume fermentation ethanol. This work focused on the influence of hydrothermal pretreatment conditions on ethanol production. Hydrothermal reaction was used to explore the maximum xylose and glucose yields, in respect to reaction temperature (120-240 °C), solid-liquid ratio (0.023-0.150) and reaction time (15-120 min). The results showed that the suitable conditions were at 180-200 °C, for 45-60 min and with 10-12.5% solids. In this range, the conjunct of xylose and glucose would reach the maximum, which can make full use of hemicellulose and cellulose in cassava alcohol residue. According to the results, respond surface methodology (RSM) based on Box-Behnken design was used to further optimize the three independent variables for the highest ethanol by co-utilization of xylose and glucose. RSM revealed that the effect of temperature on ethanol production was much more significant than the effect of reaction time and solid-liquid ratio, and the highest ethanol production was 70.6 mg/g that was close to the experiment value of 69.5 mg/g at 193 °C for 51 min and with 11.5% solids. Furthermore, the crystallinity and morphology of the untreated and pretreated cassava alcohol residue were investigated to assess the effect of hydrothermal pretreatment by scanning electron microscope (SEM) and X-ray diffraction (XRD), respectively.