Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5014744 | International Journal of Adhesion and Adhesives | 2017 | 8 Pages |
Abstract
Changes in the surface wettability of poly(p-phenylene benzobisoxazole) (PBO) fibers were investigated by thermogravimetric analysis (TGA) following an air dielectric barrier discharge (DBD) plasma treatment. The results were then supplemented and confirmed by scanning electron microscopy (SEM), dynamic contact angle analysis (DCAA), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) measurements. After exposure to the DBD plasma at a pre-determined power level, TGA analysis showed that the residual rates retained by the PBO composites decreased, which meant an increase in the amount of resin coating the PBO fibers in the composites. Observations by SEM confirmed that there was more resin adhering to the treated PBO fibers and the wetting behavior of resin on the fibers was greatly improved. Meanwhile, DCAA for the treated fibers showed a significant enhancement in fiber surface free energy. XPS and AFM were performed in order to reveal any variations in fiber surface activity and surface morphology resulting from the surface treatment. The resulting data showed that increases in oxygen-containing polar groups and surface roughness on the plasma-treated PBO fibers contributed to the above improved wetting behavior. With comprehensive analyses, it was concluded that TGA could be used as a supporting method assessing the surface wettability of PBO fibers before and after air DBD plasma treatment.
Keywords
Related Topics
Physical Sciences and Engineering
Engineering
Mechanical Engineering
Authors
Caixia Jia, Qian Wang, Ping Chen, Shaowei Lu, Rong Ren,