Computational Cutting Pattern Generation Using Isogeometric B-Rep Analysis

The cutting pattern plays a major role for the design of structural membranes, since it influences both their aesthetical appearance and structural behavior.A novel approach towards cutting pattern generation is the so-called Variation of Reference Strategy (VaReS) [1], which minimizes the total potential energy arising from the motion of a planar cutting pattern to its corresponding three-dimensional shape.With non-uniform rational B-Splines (NURBS) being the standard tool for geometry description in CAD, it is only consequent to use these for analysis as well. Isogeometric B-Rep Analysis (IBRA) [2] follows up on this idea and enriches the original Isogeometric Analysis (IGA), which was introduced by Hughes et al. [3], by the possibility of analysing trimmed NURBS geometries.This paper presents cutting pattern generation with the Variation of Reference Strategy in the context of IGA/IBRA. With this approach, the whole design of a membrane structure can be represented by NURBS geometries - including blueprint plans. To use the benefits of IBRA for cutting pattern generation, a NURBS-based membrane-element was developed for the VaReS routine.A developable surface serves as a benchmark example, since its analytical cutting pattern is known. Examples of double-curved geometries show the applicability and benefits of the proposed procedure for real structures.