Environmental effect of CI engine using microalgae methyl ester with doped nano additives

•This work presents accessibility of microalgae biofuel as fuel in diesel engines.•The engine performance and emission tests were carried out.•Microalgae biofuel was identified as a promising alternative fuel.•The doping of nano additives was identified as a auspicious additive.

Algae are organisms that grow in marine environments and use carbon dioxide and light to create bio-mass. There are two groupings of algae: microalgae and macroalgae. Macroalgae are the large, multi-cellular algae often seen growing in ponds. Microalgae, on the other hand, are tiny, unicellular algae that normally grow in suspension within a body of water. Algae oil from microalgae has the possible to become a sustainable fuel source as biodiesel. Microalgae are produced through photosynthesis by utilizing sunlight, water, carbon dioxide and other nutrients. The Botryococcus braunii algal oil was extracted by mechanical extraction method. The transesterification reaction of Botryococcus braunii algal oil with methanol and base catalyst was used for the production of biodiesel. The samples B20 were prepared for each methyl ester obtained from Botryococcus braunii algal oil separately and then the doping of TiO2 and SiO2 nanoparticles were added to the each B20 blend samples at a dosage of 50 ppm and 100 ppm with an aid of ultrasonicator. Moreover, in the absence of any engine modifications, the performance and emission characteristics of those blend samples have been investigated from the experimentally measured values such as density, viscosity, calorific value, etc. while the engine performance was also analyzed through the parameters like BSFC, BTH, exhaust emission of CO, HC, NOx and CO2. The experimental results reveal that the use of biodiesel blend with nano additives in diesel engine has exhibited good improvement in performance characteristic and reduction in exhaust emissions.