Effects of high power ultrasonic vibration on temperature distribution of workpiece in dry creep feed up grinding

Temperature history and distribution of steel workpiece (X20Cr13) was measured by a high tech infrared camera under ultrasonic assisted dry creep feed up grinding. For this purpose, a special experimental setup was designed and fabricated to vibrate only workpiece along two directions by a high power ultrasonic transducer. In this study, ultrasonic effects with respect to grinding parameters including depth of cut (ae), feed speed (vw), and cutting speed (vs) has been investigated. The results indicate that the ultrasonic vibration has considerable effect on reduction of temperature, depth of thermal damage of workpiece and width of temperature contours. Maximum temperature reduction of 25.91% was reported at condition of vs = 15 m/s, vw = 500 mm/min, ae = 0.4 mm in the presence of ultrasonic vibration.