The electrical conductivity of carbon nanotube/carbon black/polypropylene composites prepared through multistage stretching extrusion

We reported the design of a grape-cluster-like conductive network in a polypropylene (PP) matrix, where oriented multi-walled carbon nanotubes (MWCNTs) served as branches and provided charge transport over large distances while grape-like carbon black (CB) aggregates enriched around MWCNTs and linked these conductive tubes through charge transport over small distances. The key for construction of this grape-cluster-like conductive network was the extension and orientation of MWCNTs, which was achieved in this work by multistage stretching extrusion with an assembly of laminating-multiplying elements (LMEs, which divide and recombine polymer melts). The highest efficient grape-cluster-like conductive network was obtained at a CB:MWCNT weight ratio of 6. The experimental results showed that this novel grape-cluster-like conductive network provided a low percolation threshold for PP/CB/MWCNT composites due to the synergistic effect of CB and oriented MWCNTs. When the combined CB and MWCNT content was about 6.9 vol%, the electrical resistivity of PP/CB/MWCNT composites prepared by multistage stretching extrusion with 6 LMEs decreased to only 0.63 Ω cm.

Graphical abstractThis novel grape-cluster-like conductive network provided a low percolation threshold for PP/CB/MWCNT composites due to the synergistic effect of CB and oriented MWCNTs.Download full-size image