Effects of compositional inhomogeneity on the mechanical properties and morphology of styrene-co-methacrylate random ionomer mixtures

A series of poly(styrene-sodium methacrylate) SMANa ionomers of varying ion contents was synthesized, and mixtures of the ionomers were made to artificially broaden the compositional inhomogeneity of the SMANa ionomers at a constant ion content of 7.3 mol%. The mechanical properties of the unblended SMANa ionomer containing 7.3 mol% of ions and the ionomer mixtures were compared. It was found that the ionic moduli of the unblended ionomer and ionomer mixtures were very similar to each other, indicating that the mixing process did not change the degree of clustering. However, the slope of ionic plateau became steeper as the difference in the ion contents of two ionomers in the ionomer mixture increased, suggesting that the inhomogeneity of the matrix and cluster phases increased. It was also observed that the difference between the matrix and cluster Tgs increased as the divergence of the ion contents of two ionomers in the ionomer mixture became wider. In addition, it was found that when the difference of the two ion contents exceeded over 6 mol%, the ionomer mixture started to show a trace of phase-separation. At ca. 9 mol% of ion content difference, the ionomer mixture exhibited a third loss tangent peak, possibly due to the presence of the phase-separated matrix regions. The SAXS study showed that, even though the three-dimensional arrangement of multiplets in an ionomer matrix was not changed upon mixing two ionomers, the matrix phase became inhomogeneous.