Test MethodInfluence of specimen size and inner defects on high strain rates compressive behaviors of plain woven composites

This paper reports the influence of specimen size and inner defects on high strain rates compressive behaviors of plain woven composites. The compressive behaviors of plain woven composites along out-of-plane direction were investigated from experimental and numerical approaches. In experimental, the compressive stiffness and strength decreased as the size of plain woven composite specimens increased. In finite element analysis (FEA) model, a new microstructure model with random defect distribution was established to find the influence of inner defects and specimen size effect on the compressive behaviors under high strain rates. From the numerical results, the compressive strength, modulus and fracture strain decreased obviously with the increase of volume fraction and size of defects. We found that the good agreement existed between the testing and the FEA results. The defects size and distribution were the main factors to weaken the compressive stiffness and strength.