Assessment of the EPDM seal lifetime in nuclear power plants

An EPDM seal was qualified for use in nuclear power plants (NPPs). The primary function of the seal is to prevent leakage of unwanted fluids and gases during long-term normal operation, as well as during postulated accidents which may occur at the end of the planned service lifetime. Tested samples were compressed between two massive metal plates (the same compression as under regular service conditions) and exposed to an accelerated ageing procedure to simulate up to 10 years of operation, including accident simulation. Mechanical properties, compression set and a gas leakage test were carried out. The minimum necessary compression to keep the required tightness under all conditions during normal service and during accident conditions was found and the service lifetime was assessed for two seal thicknesses.