Article ID Journal Published Year Pages File Type
5210169 Reactive and Functional Polymers 2013 6 Pages PDF
Abstract
Bisphenol A type methacrylate, glycidyl methacrylate, acrylic acid and a trifunctional monomer were cured using both ultraviolet (UV) and thermal methods. The UV and thermal curing behavior of these components was evaluated using photo-differential scanning calorimetry (Photo-DSC) and Fourier Transform infrared spectroscopy (FT-IR) analyses, as well as gel fraction and pendulum hardness measurements. The reaction rate was fast, and an increasing amount of CC double bond character was observed by FT-IR, demonstrating an effective reaction in the presence of both UV irradiation and heat. The gel fraction analysis also confirmed the formation of crosslinks in the structure after the curing process. The pendulum hardness test revealed the nature of the curing process at different UV doses after UV and thermal curing. The adhesion strength was also evaluated as a function of epoxy group concentration, demonstrating that adhesion increased with increasing epoxy group content. The thermal degradation characteristics were monitored by thermal gravimetric analysis (TGA). The bonding between the epoxy and carboxyl groups resulted in a delayed degradation of the cured adhesive.
Related Topics
Physical Sciences and Engineering Chemistry Organic Chemistry
Authors
, , , ,