| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 5348568 | Applied Surface Science | 2016 | 7 Pages |
Abstract
The influence of waterjet peening on the residual stresses and fatigue performance of AISI 304 is investigated. The specimen surfaces were treated with multiple jet passes. The fatigue strength was evaluated using an alternating bending fatigue tester. The results of XRD measurements showed that a higher amount of compressive residual stresses is induced in the treated specimens. This strengthening layer is limited within the first 100 μm below the surface, which had been confirmed by micro hardness measurements. Even though the treated specimens showed compressive residual stresses the fatigue limit is lower than that of the untreated specimens. The roughness of the surface and the resulting notch effect seems to be stronger than the positive effect of the hardened layer.
Related Topics
Physical Sciences and Engineering
Chemistry
Physical and Theoretical Chemistry
Authors
Azmir Azhari, Christian Schindler, Claudia Godard, Jens Gibmeier, Eberhard Kerscher,