Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5348587 | Applied Surface Science | 2016 | 11 Pages |
Abstract
Chemical vapor deposition (CVD) diamond films have been widely applied as protective coatings on varieties of anti-frictional and wear-resistant components, owing to their excellent mechanical and tribological properties close to the natural diamond. In applications of some components, the inner hole surface will serve as the working surface that suffers severe frictional or erosive wear. It is difficult to realize uniform depositions of diamond films on surfaces of inner holes, especially ultra-large inner holes. Adopting a SiC compact die with an aperture of Ф80 mm as an example, a novel filament arrangement with a certain number of filaments evenly distributed on a circle is designed, and specific effects of filament parameters, including the filament number, arrangement direction, filament temperature, filament diameter, circumradius and the downward translation, on the substrate temperature distribution are studied by computational fluid dynamics (CFD) simulations based on the finite volume method (FVM), adopting a modified computational model well consistent with the actual deposition environment. Corresponding temperature measurement experiments are also conducted to verify the rationality of the computational model. From the aspect of depositing uniform boron-doped micro-crystalline, undoped micro-crystalline and undoped fine-grained composite diamond (BDM-UMC-UFGCD) film on such the inner hole surface, filament parameters as mentioned above are accurately optimized and compensated by orthogonal simulations. Moreover, deposition experiments adopting compensated optimized parameters and some typical contrastive parameters are also accomplished for further verifying the rationality of the computational model and the correctness of the compensation coefficient 0.7 defined for the downward translation determined by simulations. More importantly, on the basis of more simulations and verification tests, a general filament arrangement model suitable for Ф50-120 mm circular inner holes is determined, involving all above filament parameters that are functionally dependent on the diameter of the inner hole.
Keywords
Related Topics
Physical Sciences and Engineering
Chemistry
Physical and Theoretical Chemistry
Authors
Xinchang Wang, Xiaotian Shen, Fanghong Sun, Bin Shen,