Article ID Journal Published Year Pages File Type
5349711 Applied Surface Science 2015 7 Pages PDF
Abstract
A Pt/AlGaAs/InGaAs/GaAs heterostructure field-effect transistor (HFET), prepared by an electrophoretic deposition (EPD) approach on gate Schottky contact region, is fabricated and studied. The EPD-based Pt-gates with three different molar ratios (ω0) are examined by scanning electron microscopy (SEM) image. Good Pt-gate coverage with effective reduction of thermal-induced defects at Pt/AlGaAs interface is achieved through a low temperature EPD approach. Experimentally, for a gate dimension of 1 μm × 100 μm, a lower gate current of 1.9 × 10−2 mA/mm, a higher turn-on voltage of 0.85 V, a higher maximum drain saturation current of 319.3 mA/mm, and a higher maximum extrinsic transconductance of 146.8 mS/mm are obtained for an EPD-based HFET at 300 K. Moreover, comparable microwave characteristics of an EPD-based HFET are demonstrated at different temperature ambiences. Therefore, based on the improved DC performance and inherent benefits of low cost, simple apparatus, flexible deposition on varied substrates, and adjustable alloy grain size, the proposed EPD approach shows the promise to fabricate high-performance electronic devices.
Related Topics
Physical Sciences and Engineering Chemistry Physical and Theoretical Chemistry
Authors
, , , , , , ,