Article ID Journal Published Year Pages File Type
5356716 Applied Surface Science 2012 6 Pages PDF
Abstract

A process based on chemical mechanical polishing has been proposed to polishing ultra-precision nonlinear optical crystal flats with high surface quality. An annular polyurethane pad was employed in the process. An excellent flatness of the annular polishing pad can be obtained using a special conditioner. The newly developed septum and holder system in the process has significantly reduced the rigid punch effect and workpiece/pad deflection brought by the spindle and carrier system in the common chemical mechanical polishing (CMP) process. In addition, the pre-strain of the pad by the septum can effectively eliminate the elastic response of the pad on the exterior of the workpiece and hence greatly reduce the stress concentration on the edge. The ACMP process is especially suitable for the final polishing of fragile crystals that have anisotropic properties and demand strict requirements on surface figure and defects.

► Annulus Chemical Mechanical Polishing process is developed based on the conventional CMP process for polishing crystals. ► A septum & holder system suitable for the crystal is employed to replace the carrier & driving spindle. ► A turning system and ring conditioner are developed for planarization of the base plate and the pad respectivley.

Related Topics
Physical Sciences and Engineering Chemistry Physical and Theoretical Chemistry
Authors
, , , , ,