Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5362202 | Applied Surface Science | 2012 | 6 Pages |
This study experimentally investigates the surface modification of 5083 Al alloy by the electrical discharge alloying (EDA) process with a Si-Fe alloy as an electrode. Samples were analyzed by transmission electron microscopy (TEM), scanning electron microscopy (SEM), micro-hardness and corrosion resistance tests. The micro-hardness of EDA alloyed layer was evidently higher than that of the base metal (5083 Al alloy). The TEM results show that the matrix of the alloyed layer has an amorphous-like structure; the matrix contains fine needle-like Si particles, block-like Si particles and nano-size Al4.5FeSi and Al13Fe4 particles. The TEM results support experimental results for the high hardness of the alloyed layer. Moreover, the EDA alloyed layer with composite microstructures has good corrosion resistance in NaCl aqueous solution.
⺠The electrical discharge alloying process employed Si-Fe alloy as an electrode. ⺠The matrix of the alloyed layer has an amorphous-like structure. ⺠There are fine needle-like Si particles, block-like Si particles and nano-size Al4.5FeSi and Al13Fe4 particles in the alloyed layer. ⺠The alloyed layer exhibited good corrosion resistance in NaCl aqueous solution.