Direct laser interference patterning of multi-walled carbon nanotube-based transparent conductive coatings

Topographical structures were created on the surface of multi-walled carbon nanotube-based coatings deposited on borosilicate glass using the direct laser interference patterning (DLIP) technique. Films made by multi-walled carbon nanotubes (MWNTs) dispersed in antimony-doped tin oxide (ATO) matrix and networks of MWNTs with both low and high adherence to the substrates were irradiated with one single laser pulse. Due to the high absorption coefficient of ATO, the film was completely removed at the interference maxima positions leading to periodic arrays of high quality on macroscopic areas. Additionally, increase of the laser fluence has produced wider ablated regions. Irradiation of high adherent networks of MWNTs produced a periodic porous structure, what has been attributed to the presence of adherence promoters in the film. On the other hand, MWNT networks with low adhesion to the substrate were strongly removed at the interference maxima positions. In this case, however, the fabricated periodic structures presented several defects that result from the poor adherence of the film to the substrate.