Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5363090 | Applied Surface Science | 2013 | 7 Pages |
Transparent p-type ZnO:N thin films have been fabricated by the oxidation of n-type ZnxNy films. The ZnxNy thin films on glass substrate were deposited by pulsed filtered cathodic vacuum arc deposition using metallic zinc (99.999%) as a cathode target in pure nitrogen plasma. The properties of the films were examined after oxidation between 350 and 550 °C in air atmosphere. The atomic force microscopy (AFM) analysis revealed that the surface morphology was smooth. As-deposited ZnxNy films were opaque and conductive (Ï = 4.36 Ã 10â3 Ω cm, ND = 7.70 Ã 1021 cm2/Vs) due to excess of Zn in the structure. After oxidation between 350 and 500 °C, p-type ZnO:N thin films were obtained. The lowest resistivity of 44.50 Ω cm with a hole concentration and Hall mobility of 2.08 Ã 1017 cmâ3 and 0.673 cm2/Vs, respectively, was obtained after oxidation at 450 °C. However, when the oxidation temperature reached to 550 °C, the conduction type of the ZnO:N film was changed from p-type to n-type. X-ray photoemission spectroscopy (XPS) analysis confirmed the formation of ZnN bonds and substitution incorporation of oxygen for nitrogen on the surface of the film. Besides, with a further increase of oxidation temperature to 550 °C, the decrease of N concentration in the sample was also confirmed by XPS analysis.
⺠ZnO:N thin films have been fabricated by the oxidation of n-type ZnxNy films. ⺠Surface of the films was very smooth. ⺠XPS analysis confirmed the formation of ZnN bonds. ⺠p-type conductivity was achieved after oxidation at 450 °C with well characteristics. ⺠XPS analysis confirmed the decrease of N content in the film after oxidation at 550 °C.