Preparation of magnetic nickel hollow fibers with a trilobe structure using cellulose acetate fibers as templates

Nickel hollow fibers with trilobe shape in cross section and monolithic nickel structures composed of trilobe shaped nickel hollow fibrous networks were prepared by using cellulose acetate fibers from cigarette filters as the template. Magnetic ZSM-5/Ni hollow fibers were then fabricated by using the nickel-based hollow fibers as the support. The samples were characterized by scanning electron microscopy, energy dispersive X-ray spectrometer, and X-ray diffraction. The results indicate that nickel hollow fibers and ZSM-5/Ni hollow fibers retain the morphology of the cellulose acetate fibers, and the monolithic nickel structures can be prepared by pre-shaping the cellulose acetate fibers. The thickness of the nickel layer can be regulated by controlling the electroless plating times. The saturation magnetization and coercivity of the trilobe shaped nickel hollow fibers and ZSM-5/Ni hollow fibers are 27.78 and 21.59 emu/g and 78 and 61 Oe, respectively.

► Nickel hollow fibers with trilobe shape in cross section were prepared. ► Cellulose acetate fibers from cigarette filters were used as the template. ► Monolithic nickel structures were also obtained. ► Magnetic ZSM-5 coating on Ni hollow fibers were then fabricated.