| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 5364477 | Applied Surface Science | 2009 | 4 Pages |
The BCN thin films were produced by dual ion beam sputtering deposition (DIBSD). The influence of assisted ion energy on surface roughness and mechanical properties of BCN films were investigated. The surface roughness was determined by atomic force microscopy (AFM) and the mechanical properties of BCN firms were evaluated by nano-indentation in N2 gas. The composition, structure and chemical bonding of the BCN thin films were analyzed by using energy dispersive spectroscopy (EDS), transmission electron microscopy (TEM), laser Raman spectroscopy and Fourier transform infrared spectroscopy (FTIR). These films appeared as amorphous structure. As a result, the BCN films with the smoothest surface (Ra = 0.35 nm and Rp-v = 4.4 nm) and the highest nano-hardness of 30.1 GPa and elastic modulus of 232.6 GPa were obtained at 200 eV and 12 mA with N2:Ar = 1:1, and the chemical composition of this BCN film was 81 at.% B, 14 at.% C and 5 at.% N. Moreover, several bonding states such as B-N, B-C and C-N were observed in BCN thin films.
