Molecular dynamics simulation study of deep hole drilling in iron by ultrashort laser pulses

Classical molecular dynamics simulation technique is applied for investigation of the iron ablation by ultrashort laser pulses at conditions of deep hole for the first time. Laser pulse duration of 0.1 ps at wavelength of 800 nm is considered. The evolution of the ablated material in deep hole geometry differs completely from the free expansion regime as two major mechanisms are important for the final hole shape. The first one is the deposition of the ablated material on the walls, which narrows the hole at a certain height above its bottom. The second mechanism is related to ablation of the material from the walls (secondary ablation) caused by its interaction with the primary ablated particles. Properties of the secondary ablated particles in terms of the velocity and the angular distribution are obtained. The material removal efficiency is estimated for vacuum or in Ar environment conditions. In the latter case, the existence of well-defined vapor cloud having low center of the mass velocity is found. The processes observed affect significantly the material expulsion and can explain the decrease of the drilling rate with the hole depth increase, an effect observed experimentally.