Morphology and composition of nanoscale surface oxides on Fe-20Cr-18Ni{1Â 1Â 1} austenitic stainless steel

Surface oxidation ranging from initial stages to the onset of passive oxide layer formation have been investigated on Fe-20Cr-18Ni{1 1 1} single crystal surface by X-ray photoelectron spectroscopy (XPS). Surface segregation of the alloying elements and the morphology of the surface oxide nanostructure were characterized quantitatively by inelastic electron background analysis. Our results demonstrate that by increasing the oxidation temperature the relative concentrations of Fe2+ and Fe3+ cations increase due to their enhanced mobility. Higher temperature also improves the mobility of chromium, thus enhancing its segregation to the oxygen-rich surface and thereby reinforcing the passive layer on the alloy. This is in agreement with the results showing the sudden decrease in oxide film thickness at the oxidation temperatures exceeding 600 K. Additionally, a pronounced segregation of metallic nickel is found in the interface between the surface oxide layer and the bulk alloy.