Article ID | Journal | Published Year | Pages | File Type |
---|---|---|---|---|
5437245 | Ceramics International | 2017 | 20 Pages |
Abstract
The mechanical planarization machining of sapphire substrates including the C- (0001), A- (112¯0), and M- (101¯0) orientations with the sol-gel (SG) polishing pad has been performed in this paper. The polishing results show that the C-orientation with a surface roughness about 2 nm is smoother than the A- and M-orientations, and the material removal rate (MRR) of C-orientation is higher than that of them. The removal mechanism of sapphire substrate was investigated by the wear debris and subsurface structure through transmission electron microscopy (TEM). And the instrumented nanomechanical tests were applied to further reveal the removal mechanism by nanoindentation. The analysis results indicate that the variation tendency of MRRs depends on the crystalline structure and nanomechanical properties of sapphire substrates. In addition, the processing of sapphire substrates is mainly dominated by the mechanical removal sapphire material during mechanical planarization machining.
Related Topics
Physical Sciences and Engineering
Materials Science
Ceramics and Composites
Authors
Qiufa Luo, Jing Lu, Xipeng Xu, Feng Jiang,