Surface defect healing effect of silica coatings on silicon nitride fibers

In this study, silica coatings with different thickness were prepared on silicon nitride fibers by a continuous dip-coating method. The effects of the coatings on the mechanical properties of the silicon nitride fibers were investigated. The SiO2 coatings with uniform thickness were prepared from a sol solution with a concentration of 0.75 wt% and then heat-treated at 400 °C, and the strength of the fibers was improved by the treated coating. The tensile strength of a coated fiber was approximately 26% higher than that of an uncoated fiber because the thin coating healed the surface defects. Our study also confirmed that the size of sol particles must match that of the flaws on the fiber surface before these flaws could be effectively repaired. Finally, a probable mechanism will be proposed here to explain this effect. The present results demonstrate that the strength of silicon nitride fibers can be enhanced by coating them through the sol-gel process, and the findings are expected to provide guidelines for repairing strength-limiting flaws in other fibers.