| Article ID | Journal | Published Year | Pages | File Type |
|---|---|---|---|---|
| 5438024 | Ceramics International | 2017 | 8 Pages |
Abstract
In this work, multilayered graphene was used as source of carbon for the production of LaCx and the main physical properties of the produced targets were compared to standard LaCx produced using micrometric graphite. The main output of the work consisted in the reduced total porosity (28.8 vol% vs 47.8 vol%) and increased shrinkage (20.4 vol% vs 5.8 vol%) of the LaCx-Graphene samples compared to LaCx-Graphite ones. This result showed how graphene can be successfully employed as sintering aid for the sintering of carbides. Further studies are ongoing with UO2 as starting reagent for carburization within the project AUL-2013-16-176 “Study of the use of graphene as source of carbon for Uranium Carbide-Graphene nanocomposites production” now under conclusion at the European Commission DG Joint Research Centre - JRC.
Related Topics
Physical Sciences and Engineering
Materials Science
Ceramics and Composites
Authors
S. Corradetti, S.M. Carturan, A. Andrighetto, G. Mariotto, M. Giarola, A. Fabrizi, A. Maddalena, L. Biasetto,