Wettability between Fe-Al alloy and sintered MgO

In the current study, the wettability between Fe-Al alloy and sintered MgO substrate was investigated. The stable contact angle between the sintered MgO substrate and the liquid iron was approximately 134° at 1550 °C, hardly influenced by Al concentrations of 18 ppm and 370 ppm in the liquid iron. By changing hydrogen partial pressure from 0 vol% to 1 vol%, the oxygen partial pressure decreased. Meanwhile, the contact angle between the MgO substrate and the liquid iron with 370 ppm Al increased with the decrease of oxygen partial pressure. The oxygen partial pressure and contact angle were scarcely affected by increasing hydrogen partial pressure from 1 vol% to 5 vol%. In all cases with 370 ppm Al in the liquid iron, oxide layers were detected on the surface of iron samples. The oxidation of iron could be effectively prevented by increasing the hydrogen partial pressure. The MgO substrate was reduced to Mg vapor in the reducing atmosphere at a high temperature. Then the Mg vapor was dissolved into the iron even before iron melting. Under thermodynamic equilibrium condition, an oxide layer containing two components, i.e. MgO·Al2O3 phase and CaO-SiO2-MgO-Al2O3 phase, was generated on the surface of the iron sample. Due to the different wettability between the iron and the two phases, MgO·Al2O3 phase was repelled, while the CaO-SiO2-MgO-Al2O3 phase adhered to the inside area.